[linux-users: 108987] X11の画面が真っ黒 (PowerPC G3 iMac DV, Gentoo)
Hiroshi Takenaka
hiro-takenaka_50 @ gem.hi-ho.ne.jp
2015年 1月 26日 (月) 20:39:45 JST
竹中@長岡京です。
(同じ質問を Gentoo Forum でもしております。)
全盛期末の名機 iMac DV に Gentoo Linux をインストールしております。
X11 までインストールしたのですが、startx 後画面が真っ黒になってしまいます。
Ctrl + Alt + F1 も Ctrl + Alt + Delete も受け付けてくれません。
詳細は以下のとおりです。
マシンスペック:
CPU 400MHz PowerPC G3,
Memory 640MB SDRAM,
Video ATY, Rage 128 VRAM 8MB
カーネルバージョン:3.12.21 (with gentoo patches)
/etc/X11/xorg.conf と Xorg.log.0 を最後につけますが、Xorg.log.0 のビデオ
関係は、
WW (Warning) のみで、EE (Error) は出ておりません。
(キーボードとマウスにはエラーがありますが、これはドライバを evdev か
ら、kbd & mouse
に変更すると消えました。)
ビデオ関係で、気になる部分は以下のところです。
ーーー前略
[ 2880.638] (WW) R128(0): Failed to read PCI ROM!
[ 2880.638] (WW) R128(0): Video BIOS not found!
[ 2880.639] (II) R128(0): Primary Display == Type 1
[ 2880.640] (WW) R128(0): Can't determine panel dimensions, and none
specified.
ーーー中略
[ 2880.763] (WW) R128(0): Direct rendering disabled
ーーー後略
以下、xorg.conf と Xorg.log.0 を貼り付けます。
よろしくお願いします。
xorg.conf
---
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "AIGLX" "off"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
# Driver "evdev"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
# Driver "evdev"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
# ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
HorizSync 30-107
VertRefresh 48-120
# Option "PreferredMode" "1024x768"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "kmsdev" # <str>
#Option "ShadowFB" # [<bool>]
Identifier "Card0"
Driver "r128"
Option "UseFBDev" "false"
Option "NoInt10" "true"
# Driver "modesetting"
# BusID "PCI:0:16:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
# SubSection "Display"
# Viewport 0 0
# Depth 1
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 4
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 8
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 15
# EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 16
# EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
-----------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------
Xorg.log.0
----
2879.997]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 2880.011] X Protocol Version 11, Revision 0
[ 2880.017] Build Operating System: Linux 3.12.21-gentoo-r1 ppc Gentoo
[ 2880.022] Current Operating System: Linux gentoo-imacdv
3.12.21-gentoo-r1 #21 Sat Jan 24 07:42:29 JST 2015 ppc
[ 2880.022] Kernel command line: root=/dev/hda13 ro
[ 2880.033] Build Date: 22 January 2015 02:06:23AM
[ 2880.038]
[ 2880.043] Current version of pixman: 0.32.4
[ 2880.054] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2880.054] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2880.077] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 25
23:25:08 2015
[ 2880.108] (==) Using config file: "/etc/X11/xorg.conf"
[ 2880.114] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2880.136] (==) ServerLayout "X.org Configured"
[ 2880.136] (**) |-->Screen "Screen0" (0)
[ 2880.136] (**) | |-->Monitor "Monitor0"
[ 2880.148] (**) | |-->Device "Card0"
[ 2880.148] (**) |-->Input Device "Mouse0"
[ 2880.148] (**) |-->Input Device "Keyboard0"
[ 2880.149] (**) Option "AIGLX" "off"
[ 2880.149] (==) Automatically adding devices
[ 2880.149] (==) Automatically enabling devices
[ 2880.149] (==) Automatically adding GPU devices
[ 2880.207] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2880.207] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 2880.224] (II) Loader magic: 0x10214618
[ 2880.224] (II) Module ABI versions:
[ 2880.224] X.Org ANSI C Emulation: 0.4
[ 2880.224] X.Org Video Driver: 15.0
[ 2880.224] X.Org XInput driver : 20.0
[ 2880.224] X.Org Server Extension : 8.0
[ 2880.226] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2880.230] (--) PCI:*(0:0:16:0) 1002:524c:1002:524c rev 0, Mem @
0x94000000/67108864, 0x90000000/16384, I/O @ 0x00000400/256, BIOS @
0x????????/131072
[ 2880.231] (II) Open APM successful
[ 2880.245] Initializing built-in extension Generic Event Extension
[ 2880.251] Initializing built-in extension SHAPE
[ 2880.257] Initializing built-in extension MIT-SHM
[ 2880.262] Initializing built-in extension XInputExtension
[ 2880.268] Initializing built-in extension XTEST
[ 2880.274] Initializing built-in extension BIG-REQUESTS
[ 2880.279] Initializing built-in extension SYNC
[ 2880.285] Initializing built-in extension XKEYBOARD
[ 2880.290] Initializing built-in extension XC-MISC
[ 2880.295] Initializing built-in extension XINERAMA
[ 2880.300] Initializing built-in extension XFIXES
[ 2880.305] Initializing built-in extension RENDER
[ 2880.310] Initializing built-in extension RANDR
[ 2880.315] Initializing built-in extension COMPOSITE
[ 2880.319] Initializing built-in extension DAMAGE
[ 2880.324] Initializing built-in extension MIT-SCREEN-SAVER
[ 2880.329] Initializing built-in extension DOUBLE-BUFFER
[ 2880.334] Initializing built-in extension RECORD
[ 2880.338] Initializing built-in extension DPMS
[ 2880.343] Initializing built-in extension Present
[ 2880.348] Initializing built-in extension DRI3
[ 2880.352] Initializing built-in extension X-Resource
[ 2880.357] Initializing built-in extension XVideo
[ 2880.362] Initializing built-in extension XVideo-MotionCompensation
[ 2880.366] Initializing built-in extension XFree86-VidModeExtension
[ 2880.371] Initializing built-in extension XFree86-DGA
[ 2880.375] Initializing built-in extension XFree86-DRI
[ 2880.380] Initializing built-in extension DRI2
[ 2880.380] (II) "glx" will be loaded. This was enabled by default and
also specified in the config file.
[ 2880.380] (II) LoadModule: "glx"
[ 2880.399] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2880.554] (II) Module glx: vendor="X.Org Foundation"
[ 2880.554] compiled for 1.15.0, module version = 1.0.0
[ 2880.554] ABI class: X.Org Server Extension, version 8.0
[ 2880.554] (**) AIGLX disabled
[ 2880.559] Loading extension GLX
[ 2880.559] (II) LoadModule: "r128"
[ 2880.560] (II) Loading /usr/lib/xorg/modules/drivers/r128_drv.so
[ 2880.572] (II) Module r128: vendor="X.Org Foundation"
[ 2880.572] compiled for 1.15.0, module version = 6.9.2
[ 2880.572] Module class: X.Org Video Driver
[ 2880.572] ABI class: X.Org Video Driver, version 15.0
[ 2880.573] (II) LoadModule: "evdev"
[ 2880.573] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2880.594] (II) Module evdev: vendor="X.Org Foundation"
[ 2880.594] compiled for 1.15.0, module version = 2.8.2
[ 2880.594] Module class: X.Org XInput Driver
[ 2880.594] ABI class: X.Org XInput driver, version 20.0
[ 2880.595] (II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
[ 2880.598] (--) using VT number 7
[ 2880.617] (II) R128(0): PCI bus 0 card 16 func 0
[ 2880.617] (**) R128(0): Depth 24, (--) framebuffer bpp 32
[ 2880.617] (II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32
bpp pixmaps)
[ 2880.618] (==) R128(0): Default visual is TrueColor
[ 2880.618] (**) R128(0): Option "UseFBDev" "false"
[ 2880.618] (II) R128(0): VGAAccess option set to FALSE, VGA module load
skipped
[ 2880.618] (==) R128(0): RGB weight 888
[ 2880.618] (II) R128(0): Using 8 bits per RGB (8 bit DAC)
[ 2880.618] (II) Loading sub module "int10"
[ 2880.619] (II) LoadModule: "int10"
[ 2880.620] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 2880.635] (II) Module int10: vendor="X.Org Foundation"
[ 2880.635] compiled for 1.15.0, module version = 1.0.0
[ 2880.635] ABI class: X.Org Video Driver, version 15.0
[ 2880.635] (II) R128(0): initializing int10
[ 2880.637] (**) R128(0): Option "NoINT10" "true"
[ 2880.637] (--) R128(0): Chipset: "ATI Rage 128 VR RL (AGP)" (ChipID =
0x524c)
[ 2880.637] (--) R128(0): Linear framebuffer at 0x94000000
[ 2880.637] (--) R128(0): MMIO registers at 0x90000000
[ 2880.638] (--) R128(0): VideoRAM: 8192 kByte (64-bit SDR SGRAM 2:1)
[ 2880.638] (**) R128(0): Using external CRT for display
[ 2880.638] (WW) R128(0): Failed to read PCI ROM!
[ 2880.638] (WW) R128(0): Video BIOS not found!
[ 2880.639] (II) R128(0): Primary Display == Type 1
[ 2880.640] (WW) R128(0): Can't determine panel dimensions, and none
specified.
Disabling programming of FP registers.
[ 2880.640] (II) R128(0): PLL parameters: rf=2950 rd=56 min=12500
max=25000; xclk=5010
[ 2880.640] (II) Loading sub module "ddc"
[ 2880.640] (II) LoadModule: "ddc"
[ 2880.640] (II) Module "ddc" already built-in
[ 2880.641] (==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
[ 2880.641] (II) R128(0): Monitor0: Using hsync range of 30.00-107.00 kHz
[ 2880.641] (II) R128(0): Monitor0: Using vrefresh range of 48.00-120.00 Hz
[ 2880.641] (II) R128(0): Clock range: 12.50 to 250.00 MHz
[ 2880.641] (II) R128(0): Not using default mode "1792x1344"
(insufficient memory for mode)
[ 2880.642] (II) R128(0): Not using default mode "1792x1344"
(insufficient memory for mode)
[ 2880.642] (II) R128(0): Not using default mode "1856x1392"
(insufficient memory for mode)
[ 2880.642] (II) R128(0): Not using default mode "1856x1392"
(insufficient memory for mode)
[ 2880.642] (II) R128(0): Not using default mode "928x696" (hsync out of
range)
[ 2880.642] (II) R128(0): Not using default mode "1920x1440"
(insufficient memory for mode)
[ 2880.642] (II) R128(0): Not using default mode "1920x1440"
(insufficient memory for mode)
[ 2880.642] (II) R128(0): Not using default mode "960x720" (hsync out of
range)
[ 2880.642] (II) R128(0): Not using default mode "1920x1440"
(insufficient memory for mode)
[ 2880.642] (II) R128(0): Not using default mode "960x720" (hsync out of
range)
[ 2880.642] (II) R128(0): Not using default mode "2048x1536"
(insufficient memory for mode)
[ 2880.643] (II) R128(0): Not using default mode "2048x1536"
(insufficient memory for mode)
[ 2880.643] (II) R128(0): Not using default mode "1024x768" (hsync out
of range)
[ 2880.643] (II) R128(0): Not using default mode "2048x1536"
(insufficient memory for mode)
[ 2880.643] (II) R128(0): Not using default mode "1024x768" (hsync out
of range)
[ 2880.643] (II) R128(0): Not using default mode "1600x1200" (width too
large for virtual size)
[ 2880.643] (II) R128(0): Not using default mode "1600x1200" (width too
large for virtual size)
[ 2880.643] (II) R128(0): Not using default mode "1600x1200" (width too
large for virtual size)
[ 2880.643] (II) R128(0): Not using default mode "1600x1200" (width too
large for virtual size)
[ 2880.643] (II) R128(0): Not using default mode "1600x1200" (width too
large for virtual size)
[ 2880.643] (II) R128(0): Not using default mode "1400x1050" (width too
large for virtual size)
[ 2880.644] (II) R128(0): Not using default mode "1400x1050" (width too
large for virtual size)
[ 2880.644] (II) R128(0): Not using default mode "1280x1024" (width too
large for virtual size)
[ 2880.644] (II) R128(0): Not using default mode "1280x1024" (width too
large for virtual size)
[ 2880.644] (II) R128(0): Not using default mode "1280x1024" (width too
large for virtual size)
[ 2880.644] (II) R128(0): Not using default mode "1280x960" (width too
large for virtual size)
[ 2880.644] (II) R128(0): Not using default mode "1280x960" (width too
large for virtual size)
[ 2880.644] (II) R128(0): Not using default mode "1152x864" (width too
large for virtual size)
[ 2880.646] (--) R128(0): Virtual size is 1024x768 (pitch 1024)
[ 2880.646] (**) R128(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz,
85.0 Hz
[ 2880.647] (II) R128(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168
1376 768 769 772 808 +hsync +vsync (68.7 kHz zd)
[ 2880.647] (**) R128(0): Default mode "1024x768i": 44.9 MHz, 35.5 kHz,
86.9 Hz (I)
[ 2880.647] (II) R128(0): Modeline "1024x768i"x86.9 44.90 1024 1032 1208
1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz d)
[ 2880.647] (**) R128(0): Default mode "1024x768": 78.8 MHz, 60.0 kHz,
75.0 Hz
[ 2880.647] (II) R128(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
[ 2880.647] (**) R128(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz,
70.1 Hz
[ 2880.647] (II) R128(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184
1328 768 771 777 806 -hsync -vsync (56.5 kHz d)
[ 2880.647] (**) R128(0): Default mode "1024x768": 133.5 MHz, 95.3 kHz,
60.0 Hz (D)
[ 2880.647] (II) R128(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212
1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 2880.648] (**) R128(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz,
60.0 Hz
[ 2880.648] (II) R128(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 2880.648] (**) R128(0): Default mode "960x720": 117.0 MHz, 90.0 kHz,
60.0 Hz (D)
[ 2880.648] (II) R128(0): Modeline "960x720"x60.0 117.00 960 1024 1128
1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 2880.648] (**) R128(0): Default mode "928x696": 109.2 MHz, 86.4 kHz,
60.1 Hz (D)
[ 2880.648] (II) R128(0): Modeline "928x696"x60.1 109.15 928 976 1088
1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 2880.648] (**) R128(0): Default mode "896x672": 130.5 MHz, 106.3 kHz,
75.0 Hz (D)
[ 2880.648] (II) R128(0): Modeline "896x672"x75.0 130.50 896 944 1052
1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
[ 2880.648] (**) R128(0): Default mode "896x672": 102.4 MHz, 83.7 kHz,
60.0 Hz (D)
[ 2880.649] (II) R128(0): Modeline "896x672"x60.0 102.40 896 960 1060
1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 2880.649] (**) R128(0): Default mode "832x624": 57.3 MHz, 49.7 kHz,
74.6 Hz
[ 2880.649] (II) R128(0): Modeline "832x624"x74.6 57.28 832 864 928 1152
624 625 628 667 -hsync -vsync (49.7 kHz d)
[ 2880.649] (**) R128(0): Default mode "800x600": 56.3 MHz, 53.7 kHz,
85.1 Hz
[ 2880.649] (II) R128(0): Modeline "800x600"x85.1 56.30 800 832 896 1048
600 601 604 631 +hsync +vsync (53.7 kHz d)
[ 2880.649] (**) R128(0): Default mode "800x600": 114.8 MHz, 106.2 kHz,
85.0 Hz (D)
[ 2880.649] (II) R128(0): Modeline "800x600"x85.0 114.75 800 832 928
1080 600 600 602 625 doublescan +hsync +vsync (106.2 kHz d)
[ 2880.649] (**) R128(0): Default mode "800x600": 49.5 MHz, 46.9 kHz,
75.0 Hz
[ 2880.649] (II) R128(0): Modeline "800x600"x75.0 49.50 800 816 896 1056
600 601 604 625 +hsync +vsync (46.9 kHz d)
[ 2880.649] (**) R128(0): Default mode "800x600": 101.2 MHz, 93.8 kHz,
75.0 Hz (D)
[ 2880.650] (II) R128(0): Modeline "800x600"x75.0 101.25 800 832 928
1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
[ 2880.650] (**) R128(0): Default mode "800x600": 50.0 MHz, 48.1 kHz,
72.2 Hz
[ 2880.650] (II) R128(0): Modeline "800x600"x72.2 50.00 800 856 976 1040
600 637 643 666 +hsync +vsync (48.1 kHz d)
[ 2880.650] (**) R128(0): Default mode "800x600": 94.5 MHz, 87.5 kHz,
70.0 Hz (D)
[ 2880.650] (II) R128(0): Modeline "800x600"x70.0 94.50 800 832 928 1080
600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
[ 2880.650] (**) R128(0): Default mode "800x600": 87.8 MHz, 81.2 kHz,
65.0 Hz (D)
[ 2880.650] (II) R128(0): Modeline "800x600"x65.0 87.75 800 832 928 1080
600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
[ 2880.650] (**) R128(0): Default mode "800x600": 40.0 MHz, 37.9 kHz,
60.3 Hz
[ 2880.650] (II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056
600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 2880.651] (**) R128(0): Default mode "800x600": 81.0 MHz, 75.0 kHz,
60.0 Hz (D)
[ 2880.651] (II) R128(0): Modeline "800x600"x60.0 81.00 800 832 928 1080
600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 2880.651] (**) R128(0): Default mode "800x600": 36.0 MHz, 35.2 kHz,
56.2 Hz
[ 2880.651] (II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024
600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 2880.651] (**) R128(0): Default mode "700x525": 77.9 MHz, 81.5 kHz,
74.8 Hz (D)
[ 2880.651] (II) R128(0): Modeline "700x525"x74.8 77.90 700 732 892 956
525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
[ 2880.651] (**) R128(0): Default mode "700x525": 61.0 MHz, 64.9 kHz,
60.0 Hz (D)
[ 2880.651] (II) R128(0): Modeline "700x525"x60.0 61.00 700 744 820 940
525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 2880.651] (**) R128(0): Default mode "640x512": 78.8 MHz, 91.1 kHz,
85.0 Hz (D)
[ 2880.652] (II) R128(0): Modeline "640x512"x85.0 78.75 640 672 752 864
512 512 514 536 doublescan +hsync +vsync (91.1 kHz d)
[ 2880.652] (**) R128(0): Default mode "640x512": 67.5 MHz, 80.0 kHz,
75.0 Hz (D)
[ 2880.652] (II) R128(0): Modeline "640x512"x75.0 67.50 640 648 720 844
512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
[ 2880.652] (**) R128(0): Default mode "640x512": 54.0 MHz, 64.0 kHz,
60.0 Hz (D)
[ 2880.652] (II) R128(0): Modeline "640x512"x60.0 54.00 640 664 720 844
512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 2880.652] (**) R128(0): Default mode "640x480": 74.2 MHz, 85.9 kHz,
85.1 Hz (D)
[ 2880.652] (II) R128(0): Modeline "640x480"x85.1 74.25 640 672 752 864
480 480 482 505 doublescan +hsync +vsync (85.9 kHz d)
[ 2880.652] (**) R128(0): Default mode "640x480": 36.0 MHz, 43.3 kHz,
85.0 Hz
[ 2880.652] (II) R128(0): Modeline "640x480"x85.0 36.00 640 696 752 832
480 481 484 509 -hsync -vsync (43.3 kHz d)
[ 2880.653] (**) R128(0): Default mode "640x480": 31.5 MHz, 37.5 kHz,
75.0 Hz
[ 2880.653] (II) R128(0): Modeline "640x480"x75.0 31.50 640 656 720 840
480 481 484 500 -hsync -vsync (37.5 kHz d)
[ 2880.653] (**) R128(0): Default mode "640x480": 31.5 MHz, 37.9 kHz,
72.8 Hz
[ 2880.653] (II) R128(0): Modeline "640x480"x72.8 31.50 640 664 704 832
480 489 492 520 -hsync -vsync (37.9 kHz d)
[ 2880.653] (**) R128(0): Default mode "640x480": 54.0 MHz, 60.0 kHz,
60.0 Hz (D)
[ 2880.653] (II) R128(0): Modeline "640x480"x60.0 54.00 640 688 744 900
480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 2880.653] (**) R128(0): Default mode "640x480": 25.2 MHz, 31.5 kHz,
59.9 Hz
[ 2880.653] (II) R128(0): Modeline "640x480"x59.9 25.18 640 656 752 800
480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 2880.653] (**) R128(0): Default mode "720x400": 35.5 MHz, 37.9 kHz,
85.0 Hz
[ 2880.653] (II) R128(0): Modeline "720x400"x85.0 35.50 720 756 828 936
400 401 404 446 -hsync +vsync (37.9 kHz d)
[ 2880.654] (**) R128(0): Default mode "640x400": 31.5 MHz, 37.9 kHz,
85.1 Hz
[ 2880.654] (II) R128(0): Modeline "640x400"x85.1 31.50 640 672 736 832
400 401 404 445 -hsync +vsync (37.9 kHz d)
[ 2880.654] (**) R128(0): Default mode "576x432": 54.0 MHz, 67.5 kHz,
75.0 Hz (D)
[ 2880.654] (II) R128(0): Modeline "576x432"x75.0 54.00 576 608 672 800
432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
[ 2880.654] (**) R128(0): Default mode "640x350": 31.5 MHz, 37.9 kHz,
85.1 Hz
[ 2880.654] (II) R128(0): Modeline "640x350"x85.1 31.50 640 672 736 832
350 382 385 445 +hsync -vsync (37.9 kHz d)
[ 2880.654] (**) R128(0): Default mode "512x384i": 22.4 MHz, 35.5 kHz,
86.6 Hz (D)
[ 2880.654] (II) R128(0): Modeline "512x384i"x86.6 22.45 512 516 604 632
384 384 388 409 interlace doublescan +hsync +vsync (35.5 kHz d)
[ 2880.654] (**) R128(0): Default mode "512x384": 47.2 MHz, 68.7 kHz,
85.0 Hz (D)
[ 2880.655] (II) R128(0): Modeline "512x384"x85.0 47.25 512 536 584 688
384 384 386 404 doublescan +hsync +vsync (68.7 kHz d)
[ 2880.655] (**) R128(0): Default mode "512x384": 39.4 MHz, 60.0 kHz,
75.0 Hz (D)
[ 2880.655] (II) R128(0): Modeline "512x384"x75.0 39.38 512 520 568 656
384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
[ 2880.655] (**) R128(0): Default mode "512x384": 37.5 MHz, 56.5 kHz,
70.1 Hz (D)
[ 2880.655] (II) R128(0): Modeline "512x384"x70.1 37.50 512 524 592 664
384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
[ 2880.655] (**) R128(0): Default mode "512x384": 32.5 MHz, 48.4 kHz,
60.0 Hz (D)
[ 2880.655] (II) R128(0): Modeline "512x384"x60.0 32.50 512 524 592 672
384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 2880.655] (**) R128(0): Default mode "416x312": 28.6 MHz, 49.7 kHz,
74.7 Hz (D)
[ 2880.655] (II) R128(0): Modeline "416x312"x74.7 28.64 416 432 464 576
312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
[ 2880.655] (**) R128(0): Default mode "400x300": 28.1 MHz, 53.7 kHz,
85.3 Hz (D)
[ 2880.656] (II) R128(0): Modeline "400x300"x85.3 28.15 400 416 448 524
300 300 302 315 doublescan +hsync +vsync (53.7 kHz d)
[ 2880.656] (**) R128(0): Default mode "400x300": 24.8 MHz, 46.9 kHz,
75.1 Hz (D)
[ 2880.656] (II) R128(0): Modeline "400x300"x75.1 24.75 400 408 448 528
300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
[ 2880.656] (**) R128(0): Default mode "400x300": 25.0 MHz, 48.1 kHz,
72.2 Hz (D)
[ 2880.656] (II) R128(0): Modeline "400x300"x72.2 25.00 400 428 488 520
300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
[ 2880.656] (**) R128(0): Default mode "400x300": 20.0 MHz, 37.9 kHz,
60.3 Hz (D)
[ 2880.656] (II) R128(0): Modeline "400x300"x60.3 20.00 400 420 484 528
300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 2880.656] (**) R128(0): Default mode "400x300": 18.0 MHz, 35.2 kHz,
56.3 Hz (D)
[ 2880.657] (II) R128(0): Modeline "400x300"x56.3 18.00 400 412 448 512
300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 2880.657] (**) R128(0): Default mode "320x240": 18.0 MHz, 43.3 kHz,
85.2 Hz (D)
[ 2880.657] (II) R128(0): Modeline "320x240"x85.2 18.00 320 348 376 416
240 240 242 254 doublescan -hsync -vsync (43.3 kHz d)
[ 2880.657] (**) R128(0): Default mode "320x240": 15.8 MHz, 37.5 kHz,
75.0 Hz (D)
[ 2880.657] (II) R128(0): Modeline "320x240"x75.0 15.75 320 328 360 420
240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
[ 2880.657] (**) R128(0): Default mode "320x240": 15.8 MHz, 37.9 kHz,
72.8 Hz (D)
[ 2880.657] (II) R128(0): Modeline "320x240"x72.8 15.75 320 332 352 416
240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
[ 2880.657] (**) R128(0): Default mode "320x240": 12.6 MHz, 31.5 kHz,
60.1 Hz (D)
[ 2880.657] (II) R128(0): Modeline "320x240"x60.1 12.59 320 328 376 400
240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 2880.657] (**) R128(0): Default mode "360x200": 17.8 MHz, 37.9 kHz,
85.0 Hz (D)
[ 2880.658] (II) R128(0): Modeline "360x200"x85.0 17.75 360 378 414 468
200 200 202 223 doublescan -hsync +vsync (37.9 kHz d)
[ 2880.658] (**) R128(0): Default mode "320x200": 15.8 MHz, 37.9 kHz,
85.3 Hz (D)
[ 2880.658] (II) R128(0): Modeline "320x200"x85.3 15.75 320 336 368 416
200 200 202 222 doublescan -hsync +vsync (37.9 kHz d)
[ 2880.658] (**) R128(0): Default mode "320x175": 15.8 MHz, 37.9 kHz,
85.3 Hz (D)
[ 2880.658] (II) R128(0): Modeline "320x175"x85.3 15.75 320 336 368 416
175 191 192 222 doublescan +hsync -vsync (37.9 kHz d)
[ 2880.658] (==) R128(0): DPI set to (96, 96)
[ 2880.658] (II) Loading sub module "fb"
[ 2880.658] (II) LoadModule: "fb"
[ 2880.659] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2880.668] (II) Module fb: vendor="X.Org Foundation"
[ 2880.668] compiled for 1.15.0, module version = 1.0.0
[ 2880.668] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2880.668] (II) Loading sub module "ramdac"
[ 2880.668] (II) LoadModule: "ramdac"
[ 2880.669] (II) Module "ramdac" already built-in
[ 2880.669] (II) Loading sub module "shadowfb"
[ 2880.669] (II) LoadModule: "shadowfb"
[ 2880.670] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 2880.684] (II) Module shadowfb: vendor="X.Org Foundation"
[ 2880.684] compiled for 1.15.0, module version = 1.0.0
[ 2880.685] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2880.685] (II) R128(0): Page flipping disabled
[ 2880.685] (!!) R128(0): For information on using the multimedia
capabilities
of this adapter, please see http://gatos.sf.net.
[ 2880.685] (--) Depth 24 pixmap format is 32 bpp
[ 2880.685] (II) R128(0): Acceleration of RENDER operations will be
enabled upon successful loading of DRI and EXA
[ 2880.711] (WW) R128(0): Static buffer allocation failed -- need at
least 9216 kB video memory
[ 2880.732] (II) R128(0): Filling in EXA memory info
[ 2880.732] (II) R128(0): Loading EXA module...
[ 2880.732] (II) Loading sub module "exa"
[ 2880.732] (II) LoadModule: "exa"
[ 2880.733] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2880.737] (II) Module exa: vendor="X.Org Foundation"
[ 2880.737] compiled for 1.15.0, module version = 2.6.0
[ 2880.737] ABI class: X.Org Video Driver, version 15.0
[ 2880.738] (II) R128(0): Allocating EXA driver...
[ 2880.738] (II) R128(0): Acceleration enabled
[ 2880.738] (II) R128(0): Filled in offs
[ 2880.738] (II) R128(0): Going to init EXA...
[ 2880.738] (II) R128(0): Setting up EXA callbacks
[ 2880.738] (II) R128(0): Initalizing 2D acceleration engine...
[ 2880.738] (II) R128(0): Initializing EXA driver...
[ 2880.739] (II) EXA(0): Offscreen pixmap area of 5242880 bytes
[ 2880.739] (II) EXA(0): Driver registered support for the following
operations:
[ 2880.739] (II) Solid
[ 2880.739] (II) Copy
[ 2880.739] (II) R128(0): EXA Acceleration enabled
[ 2880.740] (==) R128(0): Backing store enabled
[ 2880.740] (==) R128(0): Silken mouse enabled
[ 2880.747] (II) R128(0): Using hardware cursor (scanline 8190)
[ 2880.762] (**) R128(0): DPMS enabled
[ 2880.763] (WW) R128(0): Direct rendering disabled
[ 2880.763] (==) RandR enabled
[ 2882.162] (II) AIGLX: Loaded and initialized swrast
[ 2882.162] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 2885.531] (II) Using input driver 'evdev' for 'Mouse0'
[ 2885.532] (**) Option "CorePointer"
[ 2885.532] (**) Mouse0: always reports core events
[ 2885.532] (**) evdev: Mouse0: Device: "/dev/input/mice"
[ 2885.533] (EE) evdev: Mouse0: ioctl EVIOCGBIT for bitmask in
EvdevOpenMTDev failed: Inappropriate ioctl for device
[ 2885.533] (EE) Mouse0: Couldn't open mtdev device
[ 2885.535] (EE) PreInit returned 2 for "Mouse0"
[ 2885.535] (II) UnloadModule: "evdev"
[ 2885.535] (II) Using input driver 'evdev' for 'Keyboard0'
[ 2885.535] (**) Option "CoreKeyboard"
[ 2885.535] (**) Keyboard0: always reports core events
[ 2885.535] (EE) evdev: Keyboard0: No device specified.
[ 2885.535] (EE) PreInit returned 2 for "Keyboard0"
[ 2885.535] (II) UnloadModule: "evdev"
[ 2885.577] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2885.580] (II) config/udev: Adding input device Mitsumi Electric Apple
USB Keyboard (/dev/input/event1)
[ 2885.580] (**) Mitsumi Electric Apple USB Keyboard: Applying
InputClass "evdev keyboard catchall"
[ 2885.580] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple
USB Keyboard'
[ 2885.580] (**) Mitsumi Electric Apple USB Keyboard: always reports
core events
[ 2885.581] (**) evdev: Mitsumi Electric Apple USB Keyboard: Device:
"/dev/input/event1"
[ 2885.581] (--) evdev: Mitsumi Electric Apple USB Keyboard: Vendor
0x5ac Product 0x203
[ 2885.581] (--) evdev: Mitsumi Electric Apple USB Keyboard: Found keys
[ 2885.581] (II) evdev: Mitsumi Electric Apple USB Keyboard: Configuring
as keyboard
[ 2885.581] (**) Option "config_info"
"udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input1/event1"
[ 2885.582] (II) XINPUT: Adding extended input device "Mitsumi Electric
Apple USB Keyboard" (type: KEYBOARD, id 6)
[ 2885.582] (**) Option "xkb_rules" "evdev"
[ 2885.582] (**) Option "xkb_model" "pc104"
[ 2885.582] (**) Option "xkb_layout" "us"
[ 2885.785] (II) config/udev: Adding input device Logitech M4848
(/dev/input/event2)
[ 2885.785] (**) Logitech M4848: Applying InputClass "evdev pointer
catchall"
[ 2885.785] (II) Using input driver 'evdev' for 'Logitech M4848'
[ 2885.785] (**) Logitech M4848: always reports core events
[ 2885.786] (**) evdev: Logitech M4848: Device: "/dev/input/event2"
[ 2885.786] (--) evdev: Logitech M4848: Vendor 0x5ac Product 0x301
[ 2885.786] (--) evdev: Logitech M4848: Found 1 mouse buttons
[ 2885.786] (--) evdev: Logitech M4848: Found relative axes
[ 2885.786] (--) evdev: Logitech M4848: Found x and y relative axes
[ 2885.786] (II) evdev: Logitech M4848: Configuring as mouse
[ 2885.787] (**) evdev: Logitech M4848: YAxisMapping: buttons 4 and 5
[ 2885.787] (**) evdev: Logitech M4848: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2885.787] (**) Option "config_info"
"udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input2/event2"
[ 2885.787] (II) XINPUT: Adding extended input device "Logitech M4848"
(type: MOUSE, id 7)
[ 2885.787] (II) evdev: Logitech M4848: initialized for relative axes.
[ 2885.789] (**) Logitech M4848: (accel) keeping acceleration scheme 1
[ 2885.789] (**) Logitech M4848: (accel) acceleration profile 0
[ 2885.789] (**) Logitech M4848: (accel) acceleration factor: 2.000
[ 2885.789] (**) Logitech M4848: (accel) acceleration threshold: 4
[ 2885.791] (II) config/udev: Adding input device Logitech M4848
(/dev/input/mouse0)
[ 2885.791] (II) No input driver specified, ignoring this device.
[ 2885.792] (II) This device may have been added with another device file.
[ 2885.794] (II) config/udev: Adding input device HID 062a:0000
(/dev/input/event3)
[ 2885.794] (**) HID 062a:0000: Applying InputClass "evdev pointer
catchall"
[ 2885.794] (II) Using input driver 'evdev' for 'HID 062a:0000'
[ 2885.794] (**) HID 062a:0000: always reports core events
[ 2885.794] (**) evdev: HID 062a:0000: Device: "/dev/input/event3"
[ 2885.795] (--) evdev: HID 062a:0000: Vendor 0x62a Product 0
[ 2885.795] (--) evdev: HID 062a:0000: Found 3 mouse buttons
[ 2885.795] (--) evdev: HID 062a:0000: Found scroll wheel(s)
[ 2885.795] (--) evdev: HID 062a:0000: Found relative axes
[ 2885.795] (--) evdev: HID 062a:0000: Found x and y relative axes
[ 2885.795] (II) evdev: HID 062a:0000: Configuring as mouse
[ 2885.795] (II) evdev: HID 062a:0000: Adding scrollwheel support
[ 2885.795] (**) evdev: HID 062a:0000: YAxisMapping: buttons 4 and 5
[ 2885.795] (**) evdev: HID 062a:0000: EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2885.796] (**) Option "config_info"
"udev:/sys/devices/pci0001:10/0001:10:18.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input3/event3"
[ 2885.796] (II) XINPUT: Adding extended input device "HID 062a:0000"
(type: MOUSE, id 8)
[ 2885.796] (II) evdev: HID 062a:0000: initialized for relative axes.
[ 2885.797] (**) HID 062a:0000: (accel) keeping acceleration scheme 1
[ 2885.797] (**) HID 062a:0000: (accel) acceleration profile 0
[ 2885.798] (**) HID 062a:0000: (accel) acceleration factor: 2.000
[ 2885.798] (**) HID 062a:0000: (accel) acceleration threshold: 4
[ 2885.800] (II) config/udev: Adding input device HID 062a:0000
(/dev/input/mouse1)
[ 2885.800] (II) No input driver specified, ignoring this device.
[ 2885.800] (II) This device may have been added with another device file.
[ 2885.802] (II) config/udev: Adding input device PMU (/dev/input/event0)
[ 2885.802] (**) PMU: Applying InputClass "evdev keyboard catchall"
[ 2885.802] (II) Using input driver 'evdev' for 'PMU'
[ 2885.802] (**) PMU: always reports core events
[ 2885.802] (**) evdev: PMU: Device: "/dev/input/event0"
[ 2885.803] (--) evdev: PMU: Vendor 0x1 Product 0x1
[ 2885.803] (--) evdev: PMU: Found keys
[ 2885.803] (II) evdev: PMU: Configuring as keyboard
[ 2885.803] (**) Option "config_info"
"udev:/sys/devices/virtual/input/input0/event0"
[ 2885.803] (II) XINPUT: Adding extended input device "PMU" (type:
KEYBOARD, id 9)
[ 2885.803] (**) Option "xkb_rules" "evdev"
[ 2885.803] (**) Option "xkb_model" "pc104"
[ 2885.803] (**) Option "xkb_layout" "us"
[ 2949.617] (II) Open APM successful
[ 2949.674] (II) LoadModule: "modesetting"
[ 2949.675] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 2949.693] (II) Module modesetting: vendor="X.Org Foundation"
[ 2949.693] compiled for 1.15.0, module version = 0.8.1
[ 2949.693] Module class: X.Org Video Driver
[ 2949.693] ABI class: X.Org Video Driver, version 15.0
[ 3486.365] (II) evdev: PMU: Close
[ 3486.365] (II) UnloadModule: "evdev"
[ 3486.365] (II) evdev: HID 062a:0000: Close
[ 3486.366] (II) UnloadModule: "evdev"
[ 3486.366] (II) evdev: Logitech M4848: Close
[ 3486.366] (II) UnloadModule: "evdev"
[ 3486.366] (II) evdev: Mitsumi Electric Apple USB Keyboard: Close
[ 3486.366] (II) UnloadModule: "evdev"
[ 3486.469] (EE) Server terminated successfully (0). Closing log file.
--------------------------------------------------------------------------
--------------------------------------------------------------------------
--
****************************
* Hiroshi TAKENAKA
* Nagaoka-kyo, Kyoto, Japan
****************************
linux-users メーリングリストの案内